The Dingy is done !!!

Close......

We are so close to being finished with this dingy.  We only have to paint the bottom white and run the rigging for the sails.

We cut the dingy in half.....

We are building a nesting dingy and therefore we must cut the dingy in half.  We knew this all along but it was STILL traumatic when it is actually cut with a real saw.  Scott and Brian A. used a lot of nervous energy and sweating to cut the boat and with the exception of a few mis-steps with the saw it turned out really good.

A lot of progress on the dingy

Here are some updated photos of the CLC dingy.  We will soon be cutting the boat in half and of course I will post photos of the traumatic event.